Panasonic KX TC1503B - Manual (Page 20)

^ Preparing the Answering System
Selecting the Number of Rings
You can select the number of times the unit rings before the answering
system answers a call, from “2" to “7” or “AUTO” {for Toll Saver*).
Your phone comes from the factory set to “AUTO”.
1
3
4
Press (REDIAL/PAUSE/PROGRAMl.
•The TALK indicator flashes.
Press IFLASH/CALL WAIT/PLAYBACK).
•“P" is displayed on the base unit.
•The IN USE/CHARGE/HOLD
indicator on the base unit lights.
Press
•The current setting is displayed.
Press [o], or @ to [7] to set the
number of rings.
0: Selects “AUTO”.
“A” is displayed.
2-7; The unit will answer after the
selected number of rings.
Press [ REDIAL/PAUSE/PROGRW.
•A beep sounds.
TALK Indicator
[ REDIAL/PAUSE/PROGRA^
fFLASH/CALL WAIT/PLAYBA^
* Toll Saver (When set to “AUTO”)
When you call the unit from a touch tone telephone:
If the unit answers on the 2nd ring, there is at least one new message.
If the unit answers on the 4th ring, there are no new messages.
Hang up when you hear the 3rd ring. This will save you the toll
charge for the call.
20