Selecting the line mode – Panasonic KX TC1503B User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Selecting the Line Mode
If the line is connected to a low voltage system such as a PBX, set to “B”.
Your phone comes from the factory set to “A”.
The TALK indicator light must be off before programming.
1
Press [REDIAL/PAUSE/PROGRA^.
•The TALK indicator flashes.
Press [FLASH/CALL WAIT/
p
I
a
YBA^.
•“P" is displayed on the base unit.
•The IN USE/CHARGE/HOLD
indicator on the base unit lights.
Press (
3
].
To select “A”, press (T|.
•‘T is displayed on the base unit.
To select “B”, press @.
•“2” is displayed on the base unit.
TALK Indicator
[FLASH/CALL WAIT/PLAYBACK
Press [ REDIAL/PAUSE/PROGRA^.
•A beep sounds.
[
redial
/
pause
/
progra
^
13