Panasonic PV-M1338 - Manual (Page 23)

Timer recordings must be recorded
back to back In order for them to be
placed on the Program Index list. If a
timer recording Is followed by a
function, such as REW or PLAY the
data Is lost.
Program Index Search
(For timer recordings oniy.)
This feature allows you to choose a timer recorded program from a
Program Index list, and then start a search for that program.
• Once a tape Is ejected or normal recording is started, all program
index data is erased.
1
Press INDEX in Playback or Stop
mode to display the INDEX screen.
2
Press A T to select “PROGRAM
INDEX SEARCH," and then press
► to display the PROGRAM
INDEX screen.
3
Press A T to select the desired
recorded program, and then
press ► to start the forward or
rewind search.
• When the designated program is
reached, the Combination VCR
automatically goes into Playback mode.
INDEX SEARCH
ROCiRAM INDEX SEARCH
PROGRAM INDEX
DATE START CATEGORY
12/28 10:OOA SPORTS ABCO
12;30P MOVIE
8: OOP COMEDY
3:OOP MUSIC
N80
CBC
NBC
SELECT;* ▼ KEY
SEARCH;* KEY
END :INOEX KEY
INDEX
PROGRAM INDEX SEARCH
SELECT:* ▼ KEY
SET :► KEY
END :INDEX KEY
Index Scan
(For normal and/or timer recordings.)
This feature allows you to scan (forward or reverse) each recording for 10
seconds in Playback mode,
d Press INDEX in Playback or Stop
mode to display the INDEX screen.
• This screen appears only if there are timer
recordings on the Program Index list. If this
screen does not appear, go to step c.
b Press A T to select “INDEX
SEARCH,” and then press
► to display the INDEX screen.
C Press REW or FF to begin the scan.
• As each index mark is reached, a short
playback will be performed after which
FF or REW resumes.
d Press PLAY to cancel the scan
and begin playback.
* • You may also press STOP to stop the tape.
Start here
1 Current ! Program
I - !
F~
[STOP
I^REwt^ REwlk- Press -H FF
t Indexed Point
•mr Play (for about 10 seconds)
— Fast Forward or Rewind
STOP I
23