Panasonic PV-M1338 - Manual (Page 20)

ISPECI^
Special VCR Features
Channel Caption
You can set channel names, i.e. ABC,
CBS, so that when selected, the
channel name and number appear on­
screen for easy identification. You can
go with preset names {up to 24), or
manually create your own (up to 10).
Note: You will need a list of channels
received in your area and the channel
numbers you receive them on.
2
3
4
5
a
b
C
d
Preset Caption
1
Press ACTION to display the MAIN
MENU.
2
Press to select “CH,” and
then press ACTION to display the
SET UP CHANNEL screen.
3
Press A T to select “CHANNEL
CAPTION,” and then press ► to display
the CHANNEL CAPTION screen.
-------SET UP CHANNEL------------
ANTENNA ; CABLE
AUTO SET
CHANNEL CAPTION
SELECT:A ▼ KEY
SET :► KEY
END :ACTION KEY
4
Press A T to select “PRESET
CAPTION," and then press ► to display
the PRESET CAPTION screen.
----- CHANNEL CAPTION ---
BasiMaiEBi
MANUAL CAPTION
c m
irr-T ...
-
------- PRESET CAPTION -----------
gzg -- PBS
CBS — CNN
FOX -- ESPN --
NBC -- HBO
SELECT:* ▼ KEY
SET :► KEY
END :ACTION KEY
• You can set up to twenty-four channel
captions. If you want to set a station
name other than these, go to the “Manual
Caption” section below.
5
Press ► to move the shaded area
to the right side.
Then, press A T to change the
memorized channel number to
match the caption.
Next, press
^ to set the memorized
channel number.
Now, press A T to continue.
Repeat step 5 until the Caption List
is complete.
To Make Corrections
Press A T and ► to select the memorized channel number. Then,
press A T to change, or ADD/DLT to delete the memorized
channel number.
6
Press ACTION four times to exit this mode and return
to the normal screen.
------- PRESET CAPTION -----------
TNT 42 CBC 62
UPN -- CTN 21
WB 35 TSN 52
DSC -- GLOB
CLEAR :ADD/DLT KEY
SELECT;* ▼ KEY
SET ;4 KEY
END :ACTION KEY
Manual Caption
3 Follow steps 1 -3 in the above section.
b In step 4, press A T
to select “MANUAL
CAPTION,” and then
press ► to display
the MANUAL
CAPTION screen.
— CHANNEL CAPTION —
PRESET CAPTION
EnameasiEBi
SELECT:* » KEY
SET :► KEY
END ;ACTION KEY
Press A T to select
“CH NUMBER,” and
then press ► to
move the shaded area
to the right side. __
• Channels already set in
the “Preset Caption” section are not displayed.
• You can set a total of ten channel captions with up to
four characters each.
SELECT:* T KEY
SET :► KEY
END
; ACT I ON KEY
------- MANUAL CAPTION ---------
20
Press A T to select,
and then press ^ to
enter each character
of the caption.
• Characters will change in
the following order.
r—►A-^B-^C...... >1-
I----------------- 9^....... 2
------ MANUAL CAPTION ---
CH NUMBER CAPTION
02 □---
CLEAR lADD/DLT KEY
SELECT:* Y KEY
SET
► KEY
END lACTION KEY
BLANK-
-1^0^
□
Now, press ^ repeatedly to move the cursor back
to “CH NUMBER.” Repeat steps c-d as desired.
To Make Corrections, repeatedly press ► to
move the cursor to the right, or *4 to move to the .
left to the incorrect entry and make the correction.
To Clear the caption, press ADD/DLT.
0 Press ACTION four times to exit this
mode and return to the normal screen.