Cancel a timer recording, Replace program contents, Review or ciear program contents – Panasonic PV-M1338 User Manual
Page 19: Recording js in progress), Recording is not in progress)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Cancel a Timer Recording:
(Recording js in progress)
Hold down STOP for a few seconds to cancel the Timer
Recording.
• Any future daily or weekly recordings will be performed as
programmed.
STOP/
PROGRAM
TIMER
EJECT Indicator
Replace Program Contents:
(Recording is not in progress)
1
Do step 1 on previous page. All
currently set programs will be
displayed on-screen,
2
Press AT repeatedly to
select the desired program, and
then press ► to display the
settings. (See page 18.)
3
Press
A T
repeatedly to
select, and then press
► to enter replacement
inforrination.
P DT START STOP
□----------- :---------- ---
CH SPD
2 S I0:00p12:00p125
SP
3 10 8:00p 9:00p
10
SP
4 5U 9:00p10:00p
L
LP
SELECT 1 -8:
a
t
KEY
ENTER ;► KEY
END :PROG KEY
0X151/ START STOP CH
8 SAT 10:00P 12:00P 10
TOBXTN
CATEGORYiSPORTS
iiiifflEaBEBIEQai"
SELECT:
A T
KEY
SET :■» ► KEY
END :PROG KEY
CBS
SP
Press PROG twice to exit this
mode and return to the normal TV screen.
Review or Ciear Program Contents:
(Recording is not in progress)
a
Do step 1 on previous page. All
currently set programs will be
displayed on-screen.
b
Press
A T
repeatedly to select
the desired program number.
C Press the ADD/DLT to clear the
program.
d
Press PROG to exit this mode and
return to the normal TV screen.
P DT
START STOP
CH SPD
2 8
10:00p12:00p125
SP
3 10
8:00p 9:00p
10
SP
4 SU
9:OOp10:OOp
L
LP
CANCEL:ADD/DLT KEY
SELECT 1-8:A ▼ KEY
ENTER ;► KEY
END
:PROG KEY
P DT START STOP
D--------------:-------------
CH SPD
2 8 10:00p12;00p125
SP
3 10 6:00p 9:00p
10
SP
4 SU 9:00p10:00p
L
LP
SELECT 1 -8:
a
▼ KEY
ENTER :► KEY
END :PROG KEY
If '‘PLEASE PREPARE FOR TIMER REC" appears and/or the PROGRAM TIMER indicator flashes,
check that a cassette with record tab is loaded and the Combination VCR is in Stop mode.
If the start times of two programs overlap, the lower numbered program wilt have priority.
If the start time for a timer recording comes up during a normal recording or One Touch Recording
(page 16), the timer recording will not be performed.
If there is a power interruption of more than one minute, the recording may not be performed or
continue.
If “INCOMPLETE” appears after all items have been set, check all entries and make necessary
corrections.
19