Panasonic WV-BP70 - Manual (Page 7)

(1) Camera Mounting Screw Hole
This threaded hole (1/4" - 20) is used to mount the
camera onto a mounting bracket or tripod.
(2) Flange-back Adjusting Ring
This ring is used to adjust the back focal length or
picture focus by rotating this ring to counterclock­
wise.
Caution:
Always set this ring to fully clockwise before
mounting the lens.
ELC (Electronic Light Control)
In this mode a continuously variable electronic shutter
is employed to automatically control exposure times in
the CCD Image Sensor, according to the incoming
light level.
Caution:
Under certain unique lighting conditions, the fol­
lowing may appear;
• Strong smear and/or blooming on high light
objects such as spot lights or windows.
• Noticeable flicker on the picture.
(3) Lens
This is the fixed iris lens.
When using the optional lens, use the Manual or
Fixed Iris type lens listed on page 7.
(4) Video Output Connector
This connector is used to connect a coaxial cable
to the CAMERA INPUT of specified monitor or
camera drive unit, and accept DC power and verti­
cal drive pulse, and supplies video output of the
camera.
-5-