Panasonic OMNIVISION VHS PV-M2767 - Manual (Page 26)

fcR^ V CR Plus+ Setup
Easy Taping.
VCR Plus+ programming allows you to set most items of a timer recording by simply entering a special code (PlusCode) found in TV
GUIDE magazine as well as the TV listings in selected newspapers. In order for your Combination VCR to do a VCR Plus+ recording, or
a timer recording of cable stations, some setup is required.
At first, choose your
Connection Type.
{Then, follow the instructions under the diagram.)
Connection Type A
¡pm 1^41
I
Back of
Combination VCR
Cable Box
RF Coaxial Cable
(not auppUedJ
Cable/
Antenna
Front of
Combination VCR
VIDEO IN t..AUDIO IN-FI
If your system looks like this, do the
foiiowing.
1. Compiete the "Cable Box Setup”
section at right.
2. Skip page 27 and go directly to page
28 for VCR Plus+ Programming.
Connection Type B
COMBINATION VCR>
Back of
Combination VCR
From Antenna
or Cable
RF Coaxial Cable
(not supplisci)
if your system looks like this, do the
foiiowing.
1. Skip the “Cable Box Setup” section
at right and turn to page 27.
2. Complete the “VCR Plus+ Channel
Setup” section on page 27.
3. Turn to page 28 for VCR Plus+
Programming.
VCR Plus+ and PlusCode are
trademarks of Gemstar
Development Corporation.
The VCR Plus+ system is
manufactured under license from
Gemstar Development Corporation.
Cable Box Setup
For Connection Type A (see left) only
®i
j Push MENU to
: display the MAIN
MENU.
CH CLOCK EXIT
PushA V<|[>to
select “CH,” and then
push MENU to
display the SET UP CHANNEL screen.
MAIN MENU
VCR~UWGUAGE
0] [Zr
SELECT r M k- KEY
SET :MENU KEY
Push A Vto select
“CABLE BOX SET
UP,” and then ^to
set.
[ --- SET UP CHANNEL --- ]
ANTENNA SYSTEM :
1 AUTO SET
CATV
■CABLE BOX SET UP
VCR PIUS+ CH SET UP
SELECT :A ▼ KEY
SET :► KEY
END :MENU KEY
ARE YOU US I NG
A CABLE BOX?
YES
Hig
Push A Wto select
“YES” or “NO,” and
then pushOto set.
Select YES if all
channels are received
via the cable box
{connection “A” at leftL Then, go to step 5.
Select NO if your cable connection “B” at left
SELECT"
SET
END :A T KEY
> KEY
;MENU KEY
Push MENU to exit and turn to page 27.
Push A V to select
Cable box output
channel number,
and then push |>to
enter.
If necessary, refer to your cable
box manual.
If you are using AudioA/ideo jack
connection for your cable box,
select and set “VIDEO OUT’ as the
output channel.
ENTER CABLE BOX OUTPUT
CHANNEL
EH
SELECT
SET
A T KEY
► KEY
YOUR TV IS RECEIVING
THE OUTPUT OF CABLE BOX
CH 01
This display appears for
5 seconds. (Channel
shown is example only)
Push MENU to exit this mode and then,
push A V ^ 1^ to select “EXIT.” Now,
push MENU to exit from the MAIN
MENU.
Go directly to VCR Plus+ Programming
on page 28.
26