Vcr lock feature, To cancel the vcr lock feature, Warning beeper feature – Panasonic OMNIVISION VHS PV-M2767 User Manual
Page 20: Speci^ special vcr features
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
spEci^ Special VCR Features
Check list before you begin.
□ All connections are made {see page 5).
□ Your Combination VCR is plugged in.
ni
o
0 © ©i
© 0
0
:
© © ®
© 0 ©^1
0,0, OUPtAf «LTO* 0H-T1MEF
O POO
m&m
© s
MfiA qxwy iw
w
E
t
i
T«
VCR Lock Feature
When activated, this feature prohibits all operations except for timer
recording and tape eject. This feature is used to keep children from
operating the Combination VCR.
Hold down STOP/EJECT
on the Combination VCR
for 7 seconds during Stop
or Power OFF mode.
To Cancel the VCR Lock feature,
Hold down STOP/EJECT on
the Combination VCR for 7
seconds again during Stop or
Power OFF mode.
• VCR Lock mode is cancelled
automatically after 24 hours as long
as the clock is set.
• This feature cannot be activated or
cancelled when a timer or one touch
recording is in progress.
VCR LOCK ACTIVATED
VCR LOCK OFF
Warning Beeper Feature
When you select BEEPER ON, a short warning will sound each time an
invalid entry or incomplete operation is made.
Push MENU to display
the MAIN MENU.
MAIN MENU
Push m T <3E^tO
select “VCR,” and then
push MENU to display the
SET UP VCR screen.
SELECT:* ▼
► KEY
SET :MENU KEY
Push m T to select
“BEEPER,” and then
push 0 to select
“ON” or “OFF.”
............ SET UP VCR
REPEAT PLAY : OFF
SELECT;* ▼ KEY
SET :► KEY
END :MENU KEY
Push MENU to end, and then push
m V ^ E>to select “EXIT.” Now, push
MENU to exit the MAIN MENU.
20