Panasonic OMNIVISION VHS PV-M2767 - Manual (Page 13)

TV Timer Features
\\Acheck list before you begin.
□ All connections are made {see page 5).
□ Your Combination VCR is plugged In.
On Timer with Alarm Feature
The Combination VCR can be set to automatically power on in one of 3 modes
{TV, Playback, or FM radio). You can also combine the On Timer with a one
minute alarm that gradually increases in volume.
@ ON-TIMER
Push ON TIMER to display
the ON TIMER screen.
--- - - - - - -
^1^ ^1'^ ALARWiON
EHiagi
SB-ECT
SET
END A ▼ KEY
► KEY
ON-TIMER KEY
Pushz^ ’^to select and [>to
fix the On Timer time and
then to choose the On Timer
mode (TV, PLAY, or FM
radio). See the A ^selection
order shown at right. cho 2
- cho 3
• Make sure a tape is
inserted if VCR Playback i
mode is selected. V f M9
• See “FM Radio Feature” on page 15 for
instructions on how to preset FM stations.
_ ' AlLa™_^_N
EgiiEQEmaBi™
SELECT:A T KEY
SET H ► KEY
END ;ON-TIMEHKEY
•CHI 25
1
PLAY
FM 8 ....FM1-
Push A W \ o select alarm
“ON” or “OFF.
............. ON TIMER ---------------
MMM . , .
ALARM
.............
CANCEL:ADD/DLT KEY
SELECT:A ▼ KEY
SET
► KEY
END :ON-TIMER KEY
When “ON” is selected,
'an alarm will gradually increase in
volume for one minute or until
cancelled by pushing any button on the remote or
Combination VCR (including Volume UP/DOWN).
When the alarm sound stops, the sound of the
mode you selected will ensue.
To Make Corrections,
use A ^and <] to move back and correct as necessary.
ON-TIMER
Push ON TIMER to set the On
Timer. This screen will appear
for about 5 seconds.
ON TIMER SET
• The ON TIMER indicator lights on the
front panel.
To Cancel,
push ON-TIMER to redisplay the screen in step 3. Then, push ADD/DLT
to clear the time (“6” is flashing). Now, push ON-Timer to end. “ON
TIMER END” appears on-screen for a few seconds.
If no button on the remote or Combination VCR {including a button used |
to turn off the alarm) is pushed within 60 minutes after the Combination |
VCR turns itself on, it will turn itself back off. j
Set the Sleep Timer
The Combination VCR can be set for auto power off.
i Push SLEEP to display the
SLEEP I desired sleep timer.
i • Each push of SLEEP will change the
‘ time in the order shown at right.
SLEEP TIMER 30
SLEEP TIMER 60
4-
SLEEP TIMER 90
•f
SLEEP TIMER 00 • If you push DISPLAY with the SLEEP TIMER set, __________
the remaining time will appear on-screen.
To Cancel, push SLEEP repeatedly until “SLEEP TIMER 00” appears.
13