Panasonic G350 - Manual (Page 28)

Function operation
Security
For optimum security of your telephone there are three types of security code:
LOCK CODE: Controls telephone security.
PIN: Controls SIM security.
PIN2: Controls memory security.
This function can accept any combination of three types of security above.
When the security is enabled, the PIN followed by ca* and/or the lock code will be
necessary every time the telephone is switched on.
The lock code will also be necessary when a new SIM is used with telephone and
security is enabled. This will prevent unauthorised use of your telephone and
your SIM. This function will create a highly secure telephone without
compromising on usability.
Set lock — telephone security
The following lock levels are available for telephone security:
r r v>l cut UU4^Un ty LyClit^- U MU «v'OnO M ICiy L/C eu I^WCI cu.
PARTIAL LOCK: Prohibits all outgoing calls except those made from memory.
Incoming calls may be answered.
UNLOCK: Switches off telephone security. This does not effect SIM security
NOTE: GSM emergency calls can be made and incoming calls can be accepted
at all times.
1 . I®" ® 'i:
To select lock level.
2 . the lock code
To correct errors press «.
3. P? o or o
To display lock levels. _
4. F? O
To set the lock level.
LOCK LEUEL
PfiPTIflL?
The selected lock level will be displayed during standby. To
restore normal operation to the telephone enter the lock
code.
GSM 01
PPRTIPL
LOCK
24