Panasonic G350 - Manual (Page 12)

Basic operation
hPlfSn
1
International dialling
Using the Automatic International Access Code “+" you will be able to dial
international numbers without having to know the code for the international
exchange.
Dialling national calls using the Automatic International Access Code will have no
affect on call charges. It is recommended that ail stored telephone numbers use
the Automatic International Access Code as this will aid dialling from home and
abroad.
1
.
To use the Automatic International Access Code.
2. P®" country code
Country codes are availabie in “GSM Network Codes
and Names" supplied with these operating instructions.
3. area code and telephone number
4 ¡tj=»
To make the call.
NOTE: Many countries include an initial "0” in the area code. This should, in most
cases, be left out when dialling international numbers. If you have difficulties
making international calls, contact your service provider.
Pause dialling
Pause dialling uses the DTMF tones generated by the telephone to access
externa! telephone services, such as voice mail, paging and computerised home
banking.
More than one pause can be used, but the total telephone number must not
exceed 32 digits, including pauses. Each pause will last for approximately three
seconds.
Telephone numbers that have pauses can be stored in memory, refer to "Store a
number" - page 18,