Pause dial calls, A call, Calling lirie identification (cli) o – Panasonic G350 User Manual
Page 13: Ing a call
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic operation
+01234B£?P
Pause dial calls
If you have recalled a telephone number from memory that contains pauses
begin with step 4.
1. F?" telepi" one number
2
.
“P” will be displayed.
3.
additional digits
Repeat step 2 and 3 if more pauses are needed.
4. FT ^
To make thecal!
When the call is connected, the next digits will be
displayed.
5. P? ^ or wait for three seconds
To send the digits after the pause.
Repeat step 5 if you have more pauses.
a call
13P45
To end the ca l.
¥
<
sh
;
Ttiiii
siNCOMIHS;
Ing a call
To receive a call the power must be switched on.
For best reception fully extend the antenna.
When you receive a call you will hear a ringing tone, a
flashing “INCOMING" message will be displayed and the
incoming indiiDator will flash.
any key e>;cept ^ or
To answer the call.
To reject the incoming call press
Calling Lirie Identification (CLI) O
This feature allows you to identify incoming calls and accept or reject the call.
The last twelve digits of the caller’s telephone number will be displayed on the
second line.