Failure modes – Dynon Avionics EFIS-D10A Pilots Users Guide User Manual
Page 64

Autopilot Operation
7-4
EFIS-D10A Pilot’s User Guide
AP Status Indicator Modes
AP State
Roll Display
Pitch Display
Status: Altitude Hold
ug as target altitude
Mode; AP uses Altitude B
N/A
ALT
Warning: Servo slipping
Mode
ellow
background
Mode
ellow
background
display with y
display with y
AP Status Indicator Errors
AP State
Roll Display
Pitch Display
Warning: Servo has been c
sted (See: SETUP > AP >
TST (red text)
TST (red text)
alibrated but not te
SERVO TEST)
Warning: Airspeed outsid
eed. See: SETUP > AP >
PITCH SERVO.
e min or max airsp
SPD (red text)
SPD (red text)
Warning: Servo e
d. Check DSAB
ERR (red text)
ERR (red text)
rror condition detected, or servo not foun
configuration, wiring, and servo power.
A
he above error states cannot be engaged.
PS data. If an error is
ny axis that is in any of t
FAILURE MODES
The EFIS continuously monitors the overall operation of the AP as well as the state of incoming G
detected, the subsystem where the error has occurred is restricted and reported. Some examples:
If an error in
the Pitch servo is detected, the AP reports an error in the Pitch servo, but continues operation of the
Roll servo.