DVR systems DVR-HDE-960H-960H2 Series - Manual (Page 45)

under the image to move the PTZ camera.
The movement of the PTZ is recorded as the pattern.
4. Click to save the pattern.
Repeat the above steps to save more patterns.
4.2.6 Calling Patterns
Purpose:
Follow the procedure to move the PTZ camera according to the predefined patterns.
Calling pattern in the PTZ setting interface
Steps:
1. Enter the PTZ Control interface. 2.
Select the pattern number.
3. Click , then the PTZ moves according to the pattern. Click to stop it.
Figure 4.12 PTZ- Calling Pattern
Call pattern in live view mode.
Steps:
1. In the live view mode, press PTZ control on the IR remote control, or click PTZ Control icon
the quick setting toolbar.
2. And then choose Pattern on the control bar.
3. Double click the pattern number you want to call, or you can select the pattern number and click
call the pattern.
on
to
Figure 4.13 PTZ Toolbar- Pattern
44