Dillon FI-80 - Manual (Page 18)

APPENDIX C: DISPLAYED ERROR CODES
CODE MEANING / POSSIBLE SOLUTION
Gross Overload. A load greater than the rated capacity has been applied
to the scale. Remove the load and verify operation. Contact your Dillon
distributor with any problems.
Err 0 Should not appear in normal operation. Contact your Dillon distributor.
Err 1 Should not appear in normal operation. Contact your Dillon distributor.
Err 2 Should not appear in normal operation. Contact your Dillon distributor.
Err 3 Non-volatile memory read error. One or more setup parameters have
been lost. Contact your Dillon distributor.
Err 4 Non-volatile memory write error. Contact your Dillon distributor.
Err 5 Should not appear in normal operation. Contact your Dillon distributor.
Err 7 ADC reading error. Contact your Dillon distributor.
Err 9 Calibration value read error. Contact your Dillon distributor.
Indicates that the battery voltage is too low for normal operation.
Recharge the battery.