Dillon FI-80 - Manual (Page 14)

Appendix A
APPENDIX A: SPECIFICATIONS
ANALOG SPECIFICATIONS
Excitation Voltage +10 VDC (LED), +5 VDC (LCD)
No load input 0.00 mV/V
Load cell output level up to + 3 mV/V
Sensitivity 0.4
μV / grad
Internal Resolution Approximately 150,000 counts
Display Resolution 50,000 display division max
Measurement Rate 10 Measurements /sec, nominal
System Linearity Within 0.02% of FS
Calibration Method Software Calibration, with long term storage in EEPROM
Maximum load cell support 4 x 350
Ω load cells
OPERATOR INTERFACE
Display – LED Indicators 0.56" (14 mm) 7-segment, LED, 6 Digit
Display – LCD Indicators 0.8" (20 mm) 7-segment, Liquid Crystal, 6 Digit
Additional Symbols Net, Gross, Stable, Tare, lb, kg, Zero, Peak
Keyboard 5-key flat membrane panel
POWER
Rechargeable Battery – FI-80 LCD 6 VDC, 3.0 Ah lead acid with 12 VDC,
800mA charger
DC Power Consumption - FI-80 LCD 55mA + 15mA/350
Ω Load Cell
DC Power Consumption - FI-80 LED 200mA + 30mA/350
Ω Load Cell
ENVIRONMENTAL
Operating Temperature 14° to +104
° F (-10° to +40° C)
Storage Temperature -13° to +158
° F (-25° to +70° C)
MECHANICAL
Overall Dimensions (L x W x H) 10.4" x 3.1" x 7.7" (265mm x 80mm x 195mm)