Dillon FI-80 - Manual (Page 10)

F6
Digital Filter Averages load readings to produce higher stability. The higher the
filter setting, the greater the stability but the slower the indicator’s
response time. Choose 8 unless a very fast response is needed. 1 2
4 8
√
FI-80 LCD extras:
16 32
64 128
F7
This item is for configuration by a qualified load cell indicator
technician. Do not alter this value or the instrument may respond
unpredictably. FS
FS + 2%
√
FS + 1d
FS + 9d
F8
This item is for configuration by a qualified load cell indicator
technician. Do not alter this value or the instrument readings may be
in error.
1
√
2
F9
This item is for configuration by a qualified load cell indicator
technician. Do not alter this value or the instrument readings may be
in error. 1
√
2
5
F10
This item is for configuration by a qualified load cell indicator
technician. Do not alter this value or the instrument readings may be
in error. 0
√ 0.0
0.00 0.000
0.0000 00
F12 (LCD
version only Not presently used. Keep parameter on 10. 5
10
√
20
50
75
100
F16
This item is for configuration by a qualified load cell indicator
technician. Do not alter this value or the instrument readings may be
in error. Do not press
key
F17
This item is for configuration by a qualified load cell indicator
technician. Do not alter this value or the instrument readings may be
in error. Do not press
key
F18
View Calibra-
tion Shows both the zero and span calibration value. Press key to
begin sequence
F19
This item is for configuration by a qualified load cell indicator
technician. Do not alter this value or the instrument readings may be
in error. Do not press
key
F20
This item is for configuration by a qualified load cell indicator
technician. Do not alter this value or the instrument readings may be
in error. Do not press
key
F21
Factory Reset This sub-menu will reset all parameters in the “F” and “A” menus to
the default settings. USE WITH CAUTION! Press the key
twice to execute.
F23 (LED
version only Not presently used. Arbitrary value
F24 (LED
version only)
Not presently used. Keep parameter on 0.
0
√
1