CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 9)

EdgeAccess Universal Chassis System
Chapter 1
Overview
The Edge Access L357 Series 10/100/1000 Ethernet Service Unit (ESU) converts and extends
Ethernet media between Local Area Networks (LANs) located up to 120 Km apart.
In addition, the L357 offers Quality of Service (QoS) implementation, Ethernet Jumbo Frame
support, and Layer 2 statistics, as well as standard Canoga Perkins features, such as local and remote
loopback, remote software upgrade, and remote control and monitoring through the Side-Band
Management Channel (SBMC).
1.1 L357 Series
The L357 receives and transmits 10/100/1000BASE-T Ethernet data on single mode or multimode
fiber optic cable.
The L357 front panel, shown in Figure 1, includes:
• User port options:
• 10/100/1000BASE-T copper
• 1000BASE-X fiber
• Extension port: SC connector, simplex or duplex; simplex requires a pair of L357s, one at
1310 nm wavelength and the other at 1550 nm wavelength
• Status LEDs:
• STA shows L357 status
• CFG shows configuration and setup status
• SPD and FDX show status for a UTP User port
• LNK/RX and TX pairs for the User and Extension ports show that data is received and
transmitted
Figure 1. The L357
L357 Gigabit Ethernet Service Unit 1-1