CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 23)

EdgeAccess Universal Chassis System
4.3.2 User Interface Organization
The user interface consists of selectable, nested screens, available in this order:
Main Menu
1. System Configuration
1. Hardware Configuration
2. Functional Configuration
3. Trap Configuration
4. Alarm Output Configuration
5. IP/SNMP Agent Configuration
6. Host Access Table (for standalone enclosure, only)
7. Trap/Notification Destination Table (for standalone enclosure, only)
6. Security Configuration
7. User Accounts
1. or 3. Edit User Account
8. System Information
2. Diagnostics
1. Loopback Setup
2. Remote Latency/Jitter Test
3. Link Status
4. System Alarms
5. Layer 2 Statistics
6. System Log
7. Utilities
7. PING Generation (for standalone enclosure, only)
8. Static ARP Table (for standalone enclosure, only)
9. Dynamic ARP Table (for standalone enclosure, only)
8. Software Upgrade
9. Change Password (for standalone enclosure, only)
10. Connected Sessions (for standalone enclosure, only)
Some screen descriptions include detail about SPFs for reference; the information appears on-screen
only when the L357 includes one or two SPFs.
This chapter describes each of these screen in detail.
4.3.3 Login Menu
The first screen is the Login Menu. If this is your initial setup and no password has been set, press
at the prompt for the password. Otherwise, type your password and press .
L357 Gigabit Ethernet Service Unit 4-3