CANOGA PERKINS L357 Gigabit Ethernet Service Unit - Manual (Page 39)

EdgeAccess Universal Chassis System
4.8 System Alarms
Use the System Alarms screen to view alarms and faults on the L357. See Figure 31. To view alarm
status:
1. From the Main Menu, type 4 , "System Alarms," and press . The System Alarms screen
appears.
2. When you finish checking the Alarm status, press to return to the Main Menu.
SYSTEM ALARMS
Local Remote
Configuration Errors No No
User Port Up Up
Extension Port Up Up
Remote Fault User/Ext N/A N/A
Ext Port Remote Fault No No
Link Loss Echo User/Ext No No
Link Loss Fwd Ext->User No No
Link Loss Fwd User->Ext No No
Side Band Mgmt Channel OK OK
Chassis Management OK OK
Alarm Relay Inputs N/A N/A
Power Supply Primary OK OK
Power Supply Secondary OK OK
Fan OK OK
Chassis Temperature N/A OK
Figure 31. System Alarms Screen
4.9 Layer 2 Statistics
Use the Layer 2 Statistics screen to view data transfer protocol statistics on the L357. See Figure 31.
To view layer 2 statistics, follow these steps:
1. From the Main Menu, type 5 , "System Alarms," and press . The Layer 2 Statistics screen
appears.
2. To reset the counters, press .
3. When you finish checking the statistics, press to return to the Main Menu.
L357 Gigabit Ethernet Service Unit 4-19