Login and main menu – CANOGA PERKINS 2345 T3 Fiber Optic Modem User Manual
Page 20
EdgeAccess Universal Chassis System
Model 2345 User Manual
3-4
Login and Main Menu
When you connect directly to the 2345 or to the DMM through HyperTerminal or Telnet, the first
screen is the Login Menu. To log in, follow these steps:
1. If this is your initial setup and no username or password has been set, type
admin
and press
2. If you are using a DMM, the Main Menu for the DMM appears after you log in. This is the main
management screen for the DMM. For details on all menu options, see the user manual for your
DMM. From this screen, access the 2345 by either of two methods.
• To reach the 2345 directly, follow these steps:
a. Type 4, "Manage or access a specific Module," and press
b. Type the slot and chassis numbers with a slash, such as "
1/4
" for chassis 1, slot 4, and then
press
c. At the Module Menu, type
4
, "Access User Interface," then press
Menu for the 2345.
• To reach the chassis, and then select the 2345, follow these steps:
a. Type
3
, "Manage or access a specific Chassis," and press
between the chassis in the domain, and then press
b. At the Chassis Management screen, press
then press
You can reach all configuration options from the Main Menu; see Table 4.
Table 4. Main Menu Selections
Menu Item
Description
1. System Configuration
View and set values for the system information and
communications parameters
2. Diagnostics
Set up loopback for local and remote devices
3. Performance Monitoring
View statistics related to RFC 2496 or G.826 standards
4. Link Error Counters
View number of errors that occur on the link
5. System Alarms
View current conditions for local and remote alarms
6. Utilities
Set up managing hosts for accessing the DMM and
receiving traps
7. Software Update
Download and install new firmware