CANOGA PERKINS 9160 10 Gigabit Ethernet Network Interface Device - Manual (Page 9)

9160 10 Gigabit Ethernet Network Interface Device 1-1/(1/2 Blank)
Overview
The 9160 10 Gbps Ethernet Network Interface Device that provides intelligent optical demarcation
and terminates managed transport at the point of delivery, including in a multi-tenant environment. In
addition, it offers multiple levels of security, Layer 2 statistics, remote software upgrade, remote
control and monitoring, and management through CanogaView.
The 9160 supports one port that receives and transmits 10 Gigabit Ethernet data over single mode
fiber (SMF) or multimode fiber (MMF) at 850, 1310, or 1550 nm wavelength, up to four single-port
modules that receive and transmit 10/100/1000BASE Ethernet data on SMF or MMF, and a multiple-
port (MP) module with eight ports that receive and transmit 10/100/1000BASE Ethernet data on SMF
or MMF. The hot-swappable, plug-in interface modules can include auto-ranging UTP input with
configurable optical output or can support specific UTP and optics options; for a list of interfaces
with options, see Chapter 5, Specification.
In addition to the data ports, the 9160 front panel, shown in Figure 1, includes:
• Console port for management through VT100 emulation
• LEDs for system management and various module functions; for details, see Chapter 2
• Reset switch
Figure 1. The 9160 Front Panel