CANOGA PERKINS 9160 10 Gigabit Ethernet Network Interface Device - Manual (Page 33)

9160 10 Gigabit Ethernet Network Interface Device 3-19
Set Up VLANs
Use the VLAN Configuration screen to view and set VLAN parameters for the 9160. To access the
VLAN Configuration screen, follow these steps:
1. From the Switch Configuration menu, type 5, "VLAN Configuration," and press .
2. At the VLAN Configuration screen, type 1 to view or edit VLAN information and press ,
then follow the prompts on the screen. You can view a specific port or LAG, or set the VLAN
Name, up to 20 characters.
3. At the VLAN Configuration screen, to view a part of the VLAN list that does not appear on the
screen, type 2 , then enter the number of the VLAN where you want to start viewing the list.
4. To set up ID translation for a specific port, type 3 , then press to select that port; and
follow the prompts on the port x VLAN ID Translation screen.
5. To set up Priority translation for a specific port, type 4 , then press to select that port;
and follow the prompts on the port x VLAN Priority Translation screen.
6. To add or remove a VLAN, type 5 or 6 and press , then type or select the VLAN number.
7. To set up VLAN information for a specific port, type 7 , then press to select that port;
and set values for these parameters on the port x Information screen:
• Participation Include/Exclude/Auto: Select specific numbers of VLANs that this port will
Include (always), Exclude (never), or Auto (dynamically) participate in
• Tagging Enable/Disable: Enable, allow tags to remain on packets as they exit the 9160; or
Disable, strip tags from packets before they exit the 9160
• Double Tagging Enable/Disable: Enable, add service provider ID tags to packets as they exit
the 9160; or Disable, strip service provider ID tags from packets before they exit the 9160
• Accept Frame: Accept frames for this VLAN Only or Accept All frames
• Ingress Filter: Enable, filter out received frames that are not for this VLAN, or Disable,
forward all received frames.
• PVID: Enter the VLAN ID to be assigned to any received untagged or priority tagged frames
• Default User Priority: Set the priority for any tagged packets received at this port
8. To view or update parameters for a specific VLAN, type 2 , "View/Change Interface," and press
. You can edit various parameters, such as Admin Mode, Priority, Path Cost, and Edge
Port.
9. To return to the Switch Configuration menu, press .