BendixKing KFD 840 - Manual (Page 68)

Honeywell Bendix/King KFD 840 Primary Flight Display
HSI Area KFD 840 PG PN 7450-0840-01
7-6 Rev C May 28, 2010
© Honeywell International Inc. Do not copy without express permission of Honeywell
For deviation values outside the limits of the scale, the deviation
pointer parks at the end of the scale closer to the deviation value.
When lateral deviation is invalid the deviation needle is replaced with
a red
X .
Figure 7-5: Lateral Deviation Invalid
Bearing Pointers
Figure 7-6: Bearing Pointers
Two green bearing pointers that point to the selected NAV source
are displayed. The source is either VOR or GPS. When VOR is
selected, the pointer indicates the relative bearing to the selected
NAV facility. When GPS is the source, the pointer points to the active
waypoint in the flight plan.
The circle bearing pointer is a single line pointer with the O symbol
between the center and the pointer tip. The diamond bearing pointer