Warpia SWP200 Windows Installation Manual & Troubleshooting Guide - Manual (Page 10)

Wireless USB DisplayDock Set User Guide
Page 10
3.1 Connect the PC Adapter to the PC
 Connect the Wireless USB PC Adapter to a high speed PC USB port. The system will
automatically detect and install the drivers for the connected PC Adapter.
 System Tray icon turns red
to indicate that the PC Adapter (Host) is ready to
connect to any paired device in range.
3.2 Connect the Easy Dock
1. Attach the Easy Dock to the remote display device (TV/Projector/Monitor), and ensure
the PC (with PC Adapter attached) is within 3 meter distance from the Easy Dock for the
initial connection. Ensure the two adapters have clear line-of-sight. Connect the provided
power supply to the Docking Base power receptacle.
Note : The PC Adapter and Device Adapter in this set are already paired and do not require
performing a pairing procedure. If you should need to perform pairing manually for
any reason (e.g. connecting to a new host PC Adapter, or adding a Device Adapter
that was not purchased in a set), please refer to Appendix B: Pairing Procedure
2. Wait for the System Tray icon to turn green , indicating that a wireless connection
with the Easy Dock has been established. The Display icon is also displayed as soon
as a connection is established and the Display drivers are active.
Note : If you do not see the icon changing to green, or do not see the Display icon, please
see Appendix A: Troubleshooting Help for suggestions.