Sangean DDR-63+ (V1) - Manual (Page 10)

9
Using the touch panel
The DDR-63+ has a stylish touch panel instead of conventional buttons.
To operate the buttons simply touch the button area with the tip of a finger
for about half a second. The clock set and system menu functions marked
with a dot ( ) are accessed by means of a long touch (2-3 seconds) on the
appropriate button until the display on the radio shows that the command
has been accepted.
You may find at first that the radio does not always detect that you have
touched a button. If so, try touching with a little more pressure, or for
slightly longer. You will soon find the optimum touch needed to control
your radio. The panel may be cleaned using a dry cloth. Do not use abrasives,
cleaning fluids or solvents.
Radio station presets
CD track access by numbers
Audio mute
DAB/FM auto-tune
CD/iPod random function
Remote control functions
Most of the functions of the DDR-6+ radio can be controlled using either
the touch panel or the remote control. However, there are a few functions
which are only accessible using the remote control.
These are:
As with the front panel, some operations require a longer operation of the
button (explained in the relevant sections). In this case simply keep your
finger held on the remote controlbutton for 2-3 seconds until the display on
the radio shows that the command has been accepted.