Sangean DCR-9+ (V1) User Manual

Page 7

Display modes – DAB – INFO button

Your radio has a range of display options when in DAB mode.

During listening DAB program, press and release INFO button will cycle

through the various options.

a. Time –

Displays the current time.

b. Date –

Displays the current date.

c. Station name –

Displays the name of the station being listened to .

d. Signal strength –

Displays the signal strength of the station being listened to.

e. Program type –

Displays type of station being listened to e.g. Pop, Classic, News, etc.

f. Multiplex name –

Displays the name of the DAB multiplex to which the current

station belongs.

g. Channel and Frequency –

Displays frequency and channel number to the currently tuned

DAB station.

h. Bit rate –

Displays the digital audio bit rate for the currently tuned DAB station.

Finding new station – DAB ( Digital Radio )

As time passes, new stations may become available or you may have

moved to a different part of the country. In this case you may need to

have your radio to scan for new stations.

1. With the radio switched on and in DAB mode, press and release Auto

Tune button, “scanning“ will show on the display.

2. Your clock radio will perform a scan of the DAB frequencies. As new

stations are found, the station counter on the right-hand side of the

display will increase and station will be added to the list.

Manual tuning – DAB ( Digital Radio )

Manual tuning allows you to tune your radio to a particular

DAB frequency. Any new stations found will be added to the station list.

Note that DAB stations are located in the range of 5A-13F.

1. With the radio switched on and in DAB mode, press and hold the

INFO button for 2 seconds to enter Advanced mode, the display

shows “Manual tune“.

2. Press and release the Select button to enter manual tuning mode.

3. Press the Tuning Up/Down button to select the desired DAB channel.

Press and release the Select button to tune to the chosen frequency.

If a signal is present then the channel number and the first part of

DAB multiplex name will be displayed.

4. Press and release the Select button again to return to the normal

DAB tuning mode.