Sangean DCR-9+ (V1) User Manual
Page 16
15
Line Out socket
A 3.5 mm Line out socket located on the rear side of your clock radio
(marked as ) is provided for connecting the audio signal to an
external amplifier. Inserting a plug into the line output socket will not
mute the internal loudspeaker.
Software version
The software display cannot be altered and is just for your reference.
1. Ensure your clock radio is switched on.
2. Press and hold INFO button for 2 seconds to enter Advanced mode.
3. Press Tuning Up/Down button to allocate System, press Select
button to enter System mode.
4. Press Tuning Up/Down button to allocate SW version, press Select
button to display software version.
5. Press INFO button to return to normal radio mode.
Specifications
Power Requirement
Mains: AC 100 – 240 V 50/60 Hz (switching adaptor)
Frequency Coverage
FM 87.50 – 108 MHz
DAB 174.928 – 239.200 MHz
Circuit Features
Loudspeaker: 1 x 75mm 8 Ohms
Output Power: 0.7 Watt
Headphone socket: 3.5mm dia.
Auxiliary Input socket: 3.5 mm dia.
Line Out socket: 3.5 mm dia.
Aerial System
FM wire aerial
DAB wire aerial
The company reserves the right to amend the specification without notice.
If at any time in the future you should need to dispose of this product please note that: Waste electrical products should not
be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice. (Waste Electrical and Electronic Equipment Directive)