Belt Drives Chain Drive - Manual (Page 2)

8. Install chain adjuster assembly if this is a new
installation.
9. Re-install front sprocket and rear clutch basket
assembly with chain.
10. Tighten engine nut and transmission mainshaft
nut to HD specifications using red loctite.
11. Adjust chain to proper tension. (Refer to HD
manual)
12. Soak clutch plates for 15 minutes. We recommend ATF type F or check the HD manual for whichever is
recommended for a clutch lubricant. Be sure whatever you use will not interfere with clutch release such as high
viscosity synthetic oil.
2