V.I.O. Adventure Cam User Manual

Page 4

Table of Contents

Welcome

Products

How To

Support

Notes

Support: Warranty/Returns

30-Day Return

Warranty

Lifetime Return

Welcome: A note from our President

Lithium Ion Battery

LUX

MD4 Extension

Mini DV (Digital Video)

Mount

Neutral Density Filter

NTSC (National Television Standards Committee)

PAL (Phase Alternation Line)

Sony Proprietary Cable

VCR/VTR mode

POV

RCA

Resolution

Products: Adventure Cam

Support: Glossary

Lens

12v (12 Volts)

A / V Input (Audio/Video)

AC (Alternating Current)

Adventure Cam

Camcorder

CCD (Charge Coupled Device)

Composite

DC (Direct Current)

Field of View

LANC (Lan-cee)

3.5mm Mini Plug

Products: Adventure Cam H2O

Products: S.C.O.U.T. Cam

Products: Adventure Cam II

Products: Mounts

Products: Power Sources

Products: Plug Types

Support: Cam Comparison

Support: Mounting Tips

Products: Lens and Filter Tool Kit

Products: Neutral Density Filters

Products: Lenses

How To: Change the Lenses

How To: Connect Cable to Cam

How To: General Connections

How To: Change the Neutral Density Filters

How To: Connect Cam to Television

How To: Connect Cam to Recording Device

How To: Connect LANC to Recording Device

How To: Connect Cam to Power Source

Viosport Cigarette Lighter

How To: Connect Cam to Power Source

Viosport Battery Holder

Viosport Rechargeable Battery Pack

Support: Customer Service

E-mail

Phone

Postal Mail

Welcome: Cam Care & Safety Precautions

PLEASE READ THE INFORMATION AND FOLLOW ALL INSTRUCTIONS BEFORE USING
THIS PRODUCT.

CARE:
• Clean and inspect after every use. Be sure to use a non-abrasive cloth when cleaning the lens.
• Inspect all plug terminals to make sure that they are clean and in proper alignment.
• Never force a connection.
• Always hold the cable end to connect and disconnect.
• Store your equipment in a cool, dry place.
• Check all cables for cracks or exposed wires; if a cable is suspect, discard and replace.
• Cameras are not serviceable – do not attempt to open the case as this will void any possible
warranty. The Adventure Cam 3 and S.C.O.U.T. Cam have replaceable lenses, removing the front
lens cover will not cause damage and will not void your warranty.

IMPORTANT WARNING:
Charge the Li-Ion battery with the charging unit and power adapter included in the package only!
Inserting any other power adapters may damage the device, destroy the battery pack, void the
warranty, and/or cause injury to the user.

CAUTIONS:
• Always unplug the charger when not in use.
• Always replace frayed or damaged wires and broken plugs immediately.
• Always use the charger with the original AC adapter.
• Always unplug your AC power adapter from the wall outlet before cleaning.
• Do not store, place, or use the AC power adapter where it could come into contact with water or
moisture.
• Do not recharge the battery under direct sun light.
• Do not short-circuit the metal contacts of the battery pack.
• Do not disassemble, deform, or reconstruct any part of the battery and charger kit.

NOTES:
• It is normal for the AC adapter, charging unit, and battery to become warm during regular
operation or when charging.
• If the charger does not charge the battery, check to see if the battery is already fully charged, dead,
faulty, or worn out. All rechargeable batteries will eventually wear out after being charged for a
certain numbers of cycles.
• Always keep metal contacts clean by wiping the surfaces with a dry, soft, and clean cloth.
• Remove the battery from the camcorder, Viosport Adventure Camera, and/or charger after use.
These devices will continue to drain a small current from your battery even if they are turned off.
• All batteries will naturally discharge over time even if they are not in use. Be sure to recharge the
battery on the same day or the day before you plan to use it.

Viosport 12v Rechargeable Battery Pack

Viosport Helmet Cam

3 | Welcome

How To: Focus the Lens

Support: Toubleshooting

Support: Videography Tips