V.I.O. Adventure Cam User Manual
Page 20

Table of Contents
Welcome
Products
How To
Support
Notes
Support: Warranty/Returns
30-Day Return
Warranty
Lifetime Return
Welcome: A note from our President
Lithium Ion Battery
LUX
MD4 Extension
Mini DV (Digital Video)
Mount
Neutral Density Filter
NTSC (National Television Standards Committee)
PAL (Phase Alternation Line)
Sony Proprietary Cable
VCR/VTR mode
POV
RCA
Resolution
Products: Adventure Cam
3
Support: Glossary
Lens
12v (12 Volts)
A / V Input (Audio/Video)
AC (Alternating Current)
Adventure Cam
Camcorder
CCD (Charge Coupled Device)
Composite
DC (Direct Current)
Field of View
LANC (Lan-cee)
3.5mm Mini Plug
Products: Adventure Cam H2O
My LANC lights are
flashing uncontrollably.
My LCD is showing a black
screen
The image from my helmet
cam is recording to the
memory card and not to the
tape.
Tape not advanced
Helmet cam is not
getting power
Pressing the main
record button
Record just a second (or even less) and the
tape will move out from its top position and
the lights on the remote will return to normal.
It's always recommended that you move the
tape out of its top position before recording as
the image quality in the first frames might be
degraded.
1. If using the rechargeable battery, make sure
the battery is turned on and has a charge.
2. If using the “AA” battery holder, make sure
you properly install the batteries and that they
are new.
When recording from an outside source in
VCR mode, you must refer to your recorder’s
owner’s manual. You can generally find the
instructions in a section entitled “How to
record from a TV or VCR”.
Products: S.C.O.U.T. Cam
*Additional support can be achieved by visiting www.viosport.com or calling 888.579.2267
*Check out our Education Productions in the Viosport video gallery for in depth tutorials on
getting your camera sytem set up, how to record, and many more helmet cam topics.
My LCD is showing a blue
screen
My LCD screen shows a
blinking red tape.
My LANC Remote powers
the camera into CAMERA
mode.
Recording device
needs to be set up to
accept input from
an outside source.
Adventure Cam not
sending video signal
Tape not present in
the camcorder
LANC Remote
incompatibility
1. Be sure your recording device is in VCR
(aka VTR or PLAY/EDIT) mode.
2. Refer to the owner’s manual to set up the
device to accept input from an outside source.
You can generally find the instructions in a
section entitled “How to record from a TV or
VCR”.
Call Viosport at 888.579.2267 for technical
support. If they cannot assist in getting your
helmet cam working, they will issue an RMA
for you to return the camera for further
testing.
Load a tape into your recording device.
You are using a camera with an electronic toggle
to switch modes. Our LANC v.1.6 solves this
incompatibility. It is designed to only work in
VCR mode and will automatically put your
camera in the correct mode.
Problem
Possible Cause
Possible Solution
19 | Support
Products: Adventure Cam II
Products: Mounts
Products: Power Sources
Products: Plug Types
Support: Cam Comparison
Support: Mounting Tips
Products: Lens and Filter Tool Kit
Products: Neutral Density Filters
Products: Lenses
How To: Change the Lenses
How To: Connect Cable to Cam
How To: General Connections
How To: Change the Neutral Density Filters
How To: Connect Cam to Television
How To: Connect Cam to Recording Device
How To: Connect LANC to Recording Device
How To: Connect Cam to Power Source
Viosport Cigarette Lighter
How To: Connect Cam to Power Source
Viosport Battery Holder
Viosport Rechargeable Battery Pack
Support: Customer Service
Phone
Postal Mail
Welcome: Cam Care & Safety Precautions
Viosport 12v Rechargeable Battery Pack
Viosport Helmet Cam
How To: Focus the Lens
Support: Toubleshooting
Support: Videography Tips