Firmware upgrade – Zigen HDBaseT Switches User Manual

Page 87

Matrix Switcher Series—User Manual

Firmware Upgrade

Before upgrading firmware, you have to receive a Firmware burn package containing all

software needed for burning. Follow the steps as below to upgrade the Extender

(HVX-100-R) firmware:

1. Connect the power cord to the power port on the panel of Extender (HVX-100-R).

The other end of the power cord connected to a suitable power source.

2. Connect the control PC and Extender (HVX-100-R) with a RS-232 cable.

3. On the control PC, decompress the Firmware burn package file.

4. Process the UpdateRX_xxxx.bat file to upgrade Extender (HX-RW) firmware. (xxxx is

specified for firmware version)