Zigen HDBaseT Switches - Manual (Page 21)

Matrix Switching System—User Manual
20
6.2 IR Pass-through Connection
The Matrix Switcher provides an IR Receiver Cable and IR Blaster Cable accessories for
IR pass-through. IR Receiver Cable can be connected to IR Rx ports or IR EXT on the
rear panel. On the other hand, IR Blaster Cable can be connected to IR TX ports on the
rear panel.
- Support you an IR channel to control the player from TV or control the TV from player.
- Support all kinds of IR frequency band
- IR pass-through switch is based on HDMI switched
Figure 6-7 IR Extended Aiming
– Multimedia
 The Output - IR Tx/Rx are designed on the Extender (HX-100-R). IR OUT is specified
for IR TX; alternatively, IR1 IN and IR2 IN are specified for IR Rx. Refer to Appendix E
Extender (HVX-100-R).