Zigen HDBaseT Switches - Manual (Page 2)

Matrix Switcher Series—User Manual
1
All rights reserved by ZIGEN, INC. No part of this document may be reproduced in any
form or by any means without written permission from the product manufacturer.
Changes are periodically made to the information in this document. They will be
incorporated in subsequent editions. The product manufacturer may make
improvements and /or changes in the product described in this document at any time.
All the registered trademarks referred to this manual are belonging to their respective
companies.
Before You Begin
 Follow all instructions marked on the device during using.
 Do not attempt to maintain the device by yourself, any faults, please contact your
vendor.
 Provide proper ventilation and air circulation and do not use near water.
 It is better to keep it in a dry environment.
 The system should be installed indoor only. Install either on a sturdy rack or desk in a
well-ventilated place.
 Only use the power cord supported with the device.
 Do not use liquid or aerosol cleaners to clean the device.
 Always unplug the power to the device before cleaning.
 Unplug the power cord during lightning or after a prolonged period of non-use to avoid
damage to the equipment.