Zigen HDBaseT Switches - Manual (Page 34)

Matrix Switcher Series—User Manual
33
 The Device ID is based on the DIP of switcher located on the rear panel.
Slide the scrollbar on the lower left area of main window to view all contents (including ID,
Name, A/V, I/O (only for VO/AO reference), Memory, VI Plug, AI Plug, VO Plug, AO Plug,
EDID Type, Volume, Bass, Treble, Subwoofer, Delay, Delay Unit, Max Delay and Version)
as described below:
 ID: Specify the ID address of Matrix Switcher.
 Name: The name of Matrix Switcher.
 A/V: Specify the character of audio or video. Or both of audio and video are supported
will show “Both”.
 I/O: Ports quantities of Input and Output.
 Memory: Show the quantities of memory sets.
 AI/VI Plug: Enable to detect the status of all input ports for audio/video.
 AO/VO Plug: Enable to detect the status of all output ports for audio/video.
 EDID Type: FIX (fix mode) and TV1 (access the first output channel) selection key.
- FIX mode: The Matrix Switcher will supply a set of fixed EDID values to support
up to only 1080P high performance TV.
- Output1 mode: The Matrix Switcher will access the EDID values of high
performance TV that connected to the first output channel, and copy the EDID
value to all the input channels so that the DVD player can support to all the
HDTV.
 Version: Show the version information of Matrix Switcher.
The functions as below are only for Audio Matrix Switcher (This Matrix Switcher is not
supported):
 Volume/Bass/Treble/Subwoofer: Show the Volume/Bass/Treble/Subwoofer function
is Enable or Disable.
 Delay: Show whether enables or disable the multimedia output delay time function.
 Delay Unit: Show the delay time of multimedia output. The unit for delay time is “ms”.
 Max Delay: Show the maximum permissive delay time. The unit for maximum delay
time is “ms”.