Outdoor Great Room Patio Pergola - Manual (Page 7)

Assembly of Side Beams and Front Post Assembly to Ledger Board
Four corner “L” brack-
ets (I) secured with
bolts (L)
E
I
L
I
Wood Screw
1. Move front posts in position; hold until
secured.
2. List one side beam into place and
secure to ledger board vith “L” bracket
and screws.
3. Attach corbel to front post, then screw
beam to corbel.
4. Repeat for both sides, attaching
remaining corbels. If wall is flat, corbels
may be attached to it if desired.
5. Check for levelness and square sides.
Adjust as necessary.
NOTE:
Do not bolt post feet
to ground until all
beams are in place
and unit is square