Outdoor Great Room Sapphire Fireplace - Manual (Page 7)

The Outdoor Greatroom Company ∙ 90216 Rev B-Sapphire 1/24/2011
-7-
Be sure
mounting
hooks are
facing upward
when fastening
bracket to a
wall.
2) With bracket hung securely on wall, remove
Turbo Disc assembly as well as glass cylinder
from the unit. Line mounting hooks up with 4
slots on the back side of your Sapphire and
press inward. Once all four hooks are in slots,
firmly but carefully pull the unit directly
downward to secure. Ensure that the unit is
fully and correctly secured to the mounting
bracket before continuing.
C. Hanging the Unit
1) Once a location is decided upon, a position
for the wall mounting bracket can be
determined. Using a bubble level or similar
leveling device, locate and mount bracket to
wall using at least four (4) screws, one at
each corner of the bracket. The specific type
of fasteners required will depend on the
mounting surface. Consult a professional if
unsure of the correct fasteners for your wall
type. If a stud is able to be placed near the
center of the bracket, it is preferable that at
least one screw be anchored in the stud.
 To avoid injury during installation, always
wear gloves and safety glasses while
handling your Sapphire unit, as some
edges may be sharp.
WARNING
This appliance must be secured. Use while
unsecured can present spillage, fire hazard,
and danger of tipping.