Outdoor Great Room Sapphire Fireplace - Manual (Page 11)

B. Lighting the Appliance
1. Pointing can away from face, use
the edge of the supplied snuffer or a
standard flathead screwdriver to
carefully pry lid off of can of gel fuel.
2. Remove Turbo-Disc assembly and
set can upright in fuel gel holder.
3. Using a long match or extended
lighter, carefully ignite gel and
allow to burn for 10 seconds
before CAREFULLY lowering
Turbo-Disc assembly into place.
Note: Be sure to immediately wipe up
any spilled fuel or excess fuel around
mouth of can before igniting to avoid
injury or fire.
Note: It may take several minutes for the unit
to warm up and produce the best flame. This is
completely normal.
The Outdoor Greatroom Company ∙ 90216 Rev B-Sapphire 1/24/2011
-11-
Insert photo of sapphire burning