Metalfab Electric Chain Hoist ER and NER Series - Manual (Page 43)

43
8.2 NER Model Gear Box Oil Material Safety Data Sheet (MSDS)
SECTION I
MANUFACTURER’S NAME
EMERGENCY
TELEPHONE NUMBER TELEPHONE NUMBER
FOR INFORMATION
Nippon Oil Co., Ltd. 03-3502-9161 03-3502-1111
ADDRESS
3-12, Nishi Shimbashi 1-chome, Nimato-ku, Tokyo, 105 Japan
DATE PREPARED SIGNATURE OF PREPARER
Oct. 14, 1992 Signature on file at Harrington Hoists, Inc.
TRADE NAME AND SYNONYMS CHEMICAL NAME AND SYNONYMS
BONNOC M 260 Industrial gear oil
WARNING STATEMENT
CAUTION: Prolonged or repeated inhalation of fumes or contact with skin can be harmful.
SECTION II TYPICAL COMPOSITION
Base oil: (highly refined mineral oil) >94%
Additives: (Oxidation inhibitor, Rust inhibitor, Emulsion breaker, Antiwear Agent,
Antifoamer, Friction modifier)
<6%
Notes: These materials are listed in TSCA chemical substance inventory. The carcinogens that are
listed in federal OSHA, IARC, NTP are not used in this product.
SECTION III EXPOSURE STANDARD
No OSHA exposure or Threshold Limit Value (TLV) has been established for this material. The suggested TLV is 5
mg/m
3 for a daily 8-hour exposure.
This is the OSHA exposure standard and the TLV (1990-1991) for mineral oil mists.
SECTION IV OCCUPATIONAL CONTROL PROCEDURES
Eye protection: Chemical type goggles or face shield optional.
Skin protection: Avoid prolonged or frequently repeated skin contact with wearing
impervious protective clothing including gloves.
Respiratory protection: No special respiratory protection is normally required.
Ventilation: No special ventilation is usually necessary. However, if operating condition
create high airborne concentrations of this material, special ventilation may
be needed.
Other clothing and equipment: No special clothing and equipment is usually necessary.
Work practices, hygienic practices: No information is available.
Other handling and storage requirements: No information is available.
Protective measures during maintenance
contaminated equipment: No information is available.