Compaq PRESARIO 6000 - Manual (Page 68)

6–12 Getting Started
Upgrading the Computer
Removing a Memory Module
Ä
CAUTION: When handling a memory module, be careful not to
touch any of the contacts. Doing so may damage the module.
1. Complete the procedure described in “Preparing the
Computer” on page 6–1, but do not remove the front bezel.
2. Locate the memory module inside your computer. See the
following illustration for the location of the memory modules
1, memory slots 2 and release latches 3 on the system
board.
Locating the Memory Module
✎
The location and number of memory modules may vary slightly
by model.