Workrite Poise–Dual - Manual (Page 8)

8 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Poise–Dual™ Installation Instructions
Secure attached hook and loop strips around monitor
cables, again leaving enough slack at both ends of the
arm for full movement of the arms.
Attach the monitor cables to the pole and secure with the
Velcro® straps, again leaving enough slack between the
extension arm and the pole for full movement of the arm.
Final Touches: Cable Management
Thread monitor cables through Cable Mount located on underside of Forearm.
Place Holding Tabs in center slot as shown and slide into place along Mount track. Use four tabs on
each side.
8
a
b
c
Workrite
Ergonomics
Strip
Strip
S
O
a
b
c
6400443: Poise Arm W/O Base Type 1/5-15 Lb Graphite
6400441: Poise Arm W/O Base Type 1/5-15 Lb Silver
6400444: Poise Arm W/O Base Type 2/10-22 Lb Graphite
6400442: Poise Arm W/O Base Type 2/10-22 Lb Silver
6400364: Dual Arm Pole Mount – Graphite
6400363: Dual Arm Pole Mount – Silver
SASP-B: Pole 14” W/Cover Cap – Black
6400365: Pole 14” W/Cover Cap – Silver
SACB-B: SA Clamp Base Kit, Graphite
SACB-S: SA Clamp Base Kit, Silver
SAGB-B: SA Grommet Base Kit, Graphite
SAGB-S: SA Grommet Base Kit, Silver
Replacement Part Numbers