Workrite Willow Dual-Wide Upgrade Instructions - Manual

#1500182 - Rev A
Important Safety Instructions
Read and understand all these safety instructions before using the product.
Do not mount the Desk Base of the Willow Arm on an unstable surface or any surface that could not mount the Desk
Base firmly.
During installation, beware of the recoil of the Willow Arm body when attaching or detaching the monitor to the Willow
Arm. To prevent damage or injury when changing the monitor, always raise the Arm to its highest position before the
monitor is detached. The Willow Arm can support monitors from 1 to 14 pounds.
Do not attempt to disassemble, service or modify the product.
Use only a slightly damp cloth to clean the Willow Arm surface. Never use flammable solvents like alcohol, benzene,
thinner, etc. on the product.
Willow
TM
Dual-Wide Upgrade Instructions
A
Willow Arm Assembly
Qty: 1
M
Plastic Pivot
Washer
Qty: 1
B
Quick Release
Bracket
Qty: 1
C
M4x18
Phillips
Screws
Qty: 4
F
10mm Plastic
Spacers
Qty: 4
Parts grouped by carton
D
M4x12
Phillips
Screws
Qty: 4
E
M4x8
Phillips
Screws
Qty: 4
G
Pivot Cover Cap
Qty: 1
H
3/16" Allen Wrench
Qty: 1
N
7/32" Allen
Wrench
Qty: 1
O
⅛" Allen
Wrench
Qty: 1
M8 Flat Head Cap Screw M4 8mm Screw M4 12mm Screw M4 16mm Screw Spacer
Plastic Cap 7/32” Allen Wrench 1/8” Allen Wrench
Button Head Allen Cap Screw Pivot Pin
Steel Washer Plastic Pivot Washer
M8 Flat Head Cap Screw M4 8mm Screw M4 12mm Screw M4 16mm Screw Spacer
Plastic Cap 7/32” Allen Wrench 1/8” Allen Wrench
Button Head Allen Cap Screw Pivot Pin
Steel Washer Plastic Pivot Washer
M8 Flat Head Cap Screw M4 8mm Screw M4 12mm Screw M4 16mm Screw Spacer
Plastic Cap 7/32” Allen Wrench 1/8” Allen Wrench
Button Head Allen Cap Screw Pivot Pin
Steel Washer Plastic Pivot Washer
M8 Flat Head Cap Screw M4 8mm Screw M4 12mm Screw M4 16mm Screw Spacer
Plastic Cap 7/32” Allen Wrench 1/8” Allen Wrench
Button Head Allen Cap Screw Pivot Pin
Steel Washer Plastic Pivot Washer
M8 Flat Head Cap Screw M4 8mm Screw M4 12mm Screw M4 16mm Screw Spacer
Plastic Cap 7/32” Allen Wrench 1/8” Allen Wrench
Button Head Allen Cap Screw Pivot Pin
Steel Washer Plastic Pivot Washer
M8 Flat Head Cap Screw M4 8mm Screw M4 12mm Screw M4 16mm Screw Spacer
Plastic Cap 7/32” Allen Wrench 1/8” Allen Wrench
Button Head Allen Cap Screw Pivot Pin
Steel Washer Plastic Pivot Washer
M8 Flat Head Cap Screw M4 8mm Screw M4 12mm Screw M4 16mm Screw Spacer
Plastic Cap 7/32” Allen Wrench 1/8” Allen Wrench
Button Head Allen Cap Screw Pivot Pin
Steel Washer Plastic Pivot Washer
M8 Flat Head Cap Screw M4 8mm Screw M4 12mm Screw M4 16mm Screw Spacer
Plastic Cap 7/32” Allen Wrench 1/8” Allen Wrench
Button Head Allen Cap Screw Pivot Pin
Steel Washer Plastic Pivot Washer
M8 Flat Head Cap Screw M4 8mm Screw M4 12mm Screw M4 16mm Screw Spacer
Plastic Cap 7/32” Allen Wrench 1/8” Allen Wrench
Button Head Allen Cap Screw Pivot Pin
Steel Washer Plastic Pivot Washer
P
Dual Splitter
Bracket
Qty: 1
R
⅜"x16x2½" Button
Head Allen Cap
Screw
Qty: 2
Q
Flange
Pin
Qty: 2
S
⅜"x16 Lock
Nut
Qty: 2
T
⅜" ID Belleville
Spring Washer
Qty: 2
U
⅜" x16x2½"
Flat Head Allen
Cap Screw
Qty: 1
Verify that you have all the hardware and tools needed for the assembly
Check your packages against the parts list on page 1 to verify that you have all the parts needed.
You will also need the following tools:
#3 tip Phillips screwdriver