Workrite Fino - Manual (Page 6)

6 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Fino Installation Instructions
Connect Daisy Chain Parent Unit without Occupancy Sensor (OCC):
BEFORE PLUGGING INTO WALL connect Transformer and additional lights
5
b
Plug in
c
I
B
Use Cable Clips (I) as needed to secure cord. b
Remote Local
Remote Local
a
Turn over Fino and confirm Local setting. a
Connect transformer (B) to larger diameter hole at either end of Fino unit. c
CAUTION – Setup Fino BEFORE plugging into
wall socket. Maximum number of daisy chain
lights should not exceed chart on page 8.
!
Continue to step 7 to connect Jumper units.
Make sure all connections
are complete and secure!
!