Workrite Astra Tool Bar Mounts - Manual

Workrite Ergonomics | 800.959.9675 www.workriteergo.com
#1500 150 - Rev B
Secure Tool Bar and Attach Astra
Attach Stanchion to side of Tool Bar and tighten to worksurface.
Attach assembled lamp to Mount
E
Mount
Qty: 1
Parts
Assembly Instructions for
Astra
TM
Sierra Tool Bar Mount
Attach Mount to Tool Bar Mounting
Bracket
Attach Mount to Tool Bar Mounting Bracket
with four screws, using a Phillips-head
screwdriver. Keep cushion that comes with
Mount for Step 2.
1
a
Verify that you have all the hardware needed for the assembly.
A
Tool Bar Mounting
Bracket
Qty: 1
B
Tool Bar Mounting
Plate
Qty: 1
D
A
Phillips-head screwdriver
C
M8 x 14mm
Screws
Qty: 2
Astra Light
Workrite Astra
Wor krit e A str a
2
Attach Mount to Tool Bar
Loosely attach screws to Mounting Bracket
and Mounting Plate.
Slide Mounting Plate into Tool Bar opening.
Move Astra Mount to desired position on
Tool Bar and tighten screws using the Hex
Wrench provided.
B
a
a
b
b
C
b
3
a
a
b
D
M5 x 10mm
Screws
Qty: 4
F
Hex wrench
Qty: 1
F