Workrite Ciglio Child - Manual

1 of 2 Workrite Ergonomics | 800.959.9675 www.workriteergo.com
Workrite Ciglio LED Under-Cabinet Child Lights - Assembly Instructions #1500226 Rev A
A
Light Fixture
Qty: 1
B
Universal Mounting Kit
Qty: 2
Daisy Chain Child Model
Mount to Cabinet
Determine if light will be affixed to a metal or wood cabinet and follow the appropriate step below.
Mount to METAL Cabinets:
Place Magnetic Mounts (B) onto back of
Light Fixture (A).
Attach Light Fixture to metal under-cabinet.
Magnets will hold the fixture in place.
Mount to Wood Cabinets:
Note: You will need a #2 Phillips-head screwdriver to complete this step.
Determine where you want to mount
your light and draw a straight line on the
underside of the cabinet to indicate the
center along the length of the light.
Attach the Universal Mounts (B) along
your line with Screws provided by
inserting screw through magnet and then
screwing into marked location.
Attach Light Fixture (A) onto mounts.
Magnets will hold the fixture in place.
C
Jumper Cable, 3",
6", 12", 24" or 60"
Qty: 1
Parts
When installing child units, confirm the parent unit of daisy chain is positioned so that it can be
connected to the additional unit with the supplied jumper cable(s).
Assembly Instructions:
Ciglio Under-Cabinet Light
Daisy Chain Child Models
Draw line
!
1
Place lamp
under cabinet
b
a
B
A
a
b
a
b
Under-cabinet
8"–15" depending on size
a
b
A
B
Draw line parallel to
edge of cabinet
c
Lift light
onto mounts
Attach Mounts
along drawn
line
c
OR