Workrite Fino - Manual (Page 5)

Workrite Ergonomics | 800.959.9675 www.workriteergo.com 5
Fino Installation Instructions
3
Connect Stand-alone units without Occupancy Sensor:
BEFORE PLUGGING INTO WALL connect transformer to light
a Connect transformer (B) to larger diameter hole at either end of Fino light (A).
Plug power cord into transformer (B). c
Use Cable Clips (I) as needed to secure power cord. b
c
b
Plug in
On/Off
a
Plug in
B
I
4
Connect Stand-alone units with Occupancy Sensor (OCC):
BEFORE PLUGGING INTO WALL connect transformer, light, and OCC
a Connect transformer (B) to larger diameter hole at either end of Fino light (A).
Plug the OCC into the SMALLER diameter hole on the Fino side AWAY from the Transformer. NOTE:
If OCC inserted into larger hole, fixture will be damaged.
b
Plug power cord into transformer (B). d
Use Cable Clips (I) as needed to secure power cord. c
d
b
c
Plug in
On/Off
a
Plug in
Plug in
I
J
B
CAUTION – Insert OCC into
smaller hole of Fino unit ONLY
or you will damage your Fino.
!
Plug power cord into wall. Position light away from your eyes, and turn on. d
d
Plug in
Plug power cord into wall. Position light away from your eyes, and turn on. e
Plug in
e
Make sure all connections
are complete and secure!
!
Make sure all connections
are complete and secure!
!