12 sierra series workcenters special settings, Initialize legs if you have not done so already, Change display from inches to centimeters – Workrite Sierra Assembly Instructions for 3-leg Workcenters User Manual
Page 11

Workrite Ergonomics | 800.959.9675 www.workriteergo.com
11
Sierra Series Workcenters - Assembly Instructions for 2 and 3-leg Tables
1
2
Sierra Series Workcenters
Special Settings
Initialize legs if you have not done so already
After all the legs and the switch are connected and the power cord has been plugged in, hold the
down arrow on the switch until the legs make a short motion down and then back up.
This initializes and synchronizes the table legs.
or +
2
3
1
5
10
15
20
25
30
35
40
45
50
55
60
You must complete
this initialization
step or your table
will NOT function
properly.
Hold down until
table moves
slightly upwards.
Change display from inches to centimeters
Simultaneously press and hold 1 & 2 and the Up Arrow until the readout changes to show “5 5”.
Press the “SET” button with a ballpoint pen (NOT paperclip) to change from inches to centimeters.
To return to inches, repeat the same process.
a
b
or +
2
3
1
5
10
15
20
25
30
35
40
45
50
55
60
a
b