Wine Guardian Ducted Wine Cellar Cooling Systems (WG175) - Manual - Manual (Page 32)

28
Planning the Installation
规划安装
Addressing Items in the Planning Process 解决规划过程中的问题

Where to locate the unit? Should it be built into the wall or mounted remote and
ducted into the cellar?

How to mount the unit?

Decide where to locate the supply and return grilles in the room to achieve the
temperature gradient and circulation preferred.

Locate the electrical power outlet close to the unit, in cellar or out. Do not use
an extension cord!

Does the condenser heat exhaust need to be ducted away?

Where to locate the thermostat?

Where to run the drain line?

Are all the parts here to complete the installation?
 ？是将系统安装到墙上或主机安装窖外，由通风管道引入酒窖？

 窖内，窖外？不要使用延长线！
？
Performing a Pre-installation Check 执行安装前检查
 Check for the proper installation of the electrical plug configuration.
 Check for the properly sized breaker.
 Is the cellar built with adequate insulation and vapor barriers?
 Are ducts installed above the ceiling or in accessible places properly sized
before being covered?
 Is enough space available around the unit for service and repair?
检查了电源插座的配置是否正确安装。
检查合适尺寸的断路器。
是否有足够的绝缘和防潮层？
被覆盖之前，通风管道安装是否高于天花板顶部，或在出入方便的地方进入酒窖
设备周围是否有足够的空间可用来服务和维修设备？