Welch Allyn Acuitylink Program On Your Mobile Device - Installation Guide User Manual
Page 2
2
Install the AcuityLink
®
Clinician Notifier program on your mobile device
Welch Allyn
Configure the Clinician Notifier files
You must take the following steps to prevent these problems after the AcuityLink
Clinician Notifier program is reset:
•
Missing Clinician Notifier icon in the device Start menu,
•
Multiple Clinician Notifier icons in the Programs menu
•
A popup message stating that Clinician Notifier is already installed.
1.
In the p.c. temporary location from
, take these steps for both the
ClinicianNotifier.CAB file and the selected .CAB file:
a.
Point the cursor on the file, and click the right key of the pointing device.
b.
Click Properties.
c.
Clear the box next to Read-only.
Copy the AcuityLink Clinician Notifier program to the
mobile device
Locate a folder on the mobile device
1.
On the p.c., open the Windows Mobile synchronization program.
2.
Navigate to the mobile device directory.
3.
Refer to your device’s directions for use to determine a non-volatile random access
memory (NVRAM) location (e.g. “\Application”).
4.
Open the non-volatile portion of your mobile device specified in
.
Copy the Clinician Notifier subfolder from the p.c. to the mobile device folder
1.
From the p.c. temporary hard drive location, copy and paste the entire contents of the
Clinician Notifier mobile device subfolder into the folder specified in
.
From the p.c. temporary hard drive location, copy and paste the selected .Net
framework .CAB (if any) into the NVRAM folder specified in
.
If a File Conversion pop-up window appears regarding converting files when
synchronizing, click OK.
A window appears that indicates the Clinician Notifier software files are copying.
2.
From the p.c. temporary hard drive location, copy the ClinicianNotifier.CAB file and
any necessary .Net framework .CAB file and paste them into the mobile device root
directory.
3.
Terminate the connection between the mobile device and the personal computer.
Note
If your device instructions specify a specific location from which files are restored
after a battery change or a hard reset, make sure you use that location.