Welch Allyn CP100 And CP200 Software Upgrade Instructions - Installation Guide - Manual (Page 8)

CP 100/CP 200 Electrocardiographs – Software Release 2.2
8 of 8
Service Information
Resetting the Device
If the electrocardiograph is unresponsive for an extended time, it might be “frozen.” If this occurs, reset the
electrocardiograph by pressing the reset button located on the right side. To press the reset button, insert a small
object, such as small paper clip, into the hole.
Figure 9
4341 State Street Road, PO Box 220, Skaneateles Falls, NY 13153-0220 USA 1 800 535 6663, + 1 315 685 4560
www.welchallyn.com
Mat. Number: 706342, Ver: B
Reset button